설명
기술적인 매개 변수
생산 소개
짐머 tsv 스캔바디 is suitable for intraoral and conventional use in the scanner. All scanbodies are made from titanium thus ensuring much higher precision and durability. The scanbodies with a special surface treatment can be sterilized and are labeled for better differentiation. The scanbodies are required when using titanium bases and also for designing custom abutments.
짐머 tsv 스캔바디간단한 치과 임플란트 위치 전송 및{0}}시스템 식별 사용자 친화적인 환경 내에서{1}}복구적인 위치를 정확하게 확보합니다.
1. Auto-recognition
2. Multiple use
3. Autoclavable titanium materials
4. For implant level impression
The Attentions when using scanbody as below
1.The scanning of the bridge has high scanning requirements. If there is any defect in the implant, it needs to communicate with the customer in time to solve it. Avoid affecting the tightness of the bridge in the later stage
2.스캔바디 스캔 시
A. 임플란트 세척
B.Check that the scan body fits the implant
C. 임플란트가 흔들리거나 나사가 잠겨 있는지 확인하십시오.
D.Ensure that the scanbody is clean and the developer is sprayed evenly.
E.To ensure the scanning of the scan body is complete, to avoid the matching errors laterly
3.Gum scanning to ensure that the gums adhere to the model
4.왁스업{1}}스캔은 브릿지 높이의 오류와 나중 단계에서 브릿지의 치은 기부 오류를 피하기 위해 모델의 맞춤에 주의해야 합니다.
5.If there are screw holes on the wax-up, you need to fill the holes with wax. Avoid inappropriate interface generation when calculating wax-up later
The process of zimmer tsv scanbody usage:
Put the scanbody on the implant, and the surface information of the scanbody is obtained by optical impression technology to generate a virtual model. According to the size information of the scanpost, the spatial positional relationship between the scanpost and the implant site can be obtained. According to the virtual position information of the implant, the restoration can be designed or even printed by CAD/CAM technology. The correct location of implant transfer and its positional relationship with adjacent teeth or adjacent implants is very important for the design of restorations and the tightness of restorations, and precise restorations are necessary to avoid mechanical and biological complications and ensure The long-term success rate of implant therapy is also significant.
디지털 인상 기법에는 다음이 포함됩니다.
1. direct intraoral scanning
2. Extraoral plaster mould scanning by the intraoral scanner or laboratory scanners
인상 정확도에 대한 스캔 바의 영향:
Digital impression pick-up can be done by the original scan body, custom scanpost and abutment. Most of the original scanbodies used are mostly screw-retained cylindrical designs. there are also other design methods, such as short scanbody with an angle at the top. It should be noted that, whether it is intraoral or extraoral scanning, The scan body cannot be rigidly connected.
짐머 tsv 스캔바디그림


짐머 tsv 스캔바디 호환되는 시스템 옵션:

Certification
Packing Delivery

회사 프로필


전시 사진:

임상 지침
1. Digital impression technology has been widely used in cases of implant-supported upper single crown restorations, and its accuracy has been demonstrated. Therefore, for implant-supported restoration of the upper single crown structure, digital impression technology can be used as a routine method in clinical practice.
2. The intraoral scanning method has an impact on the accuracy of digital impressions. Different brands of scanners have specific clinical operation methods, and the manufacturer's instructions should be followed during clinical operations.
3. In order to improve the accuracy of digital impression making, it is recommended to use the original scan bar for digital impression making.
4. For cases with large inter-implant spacing, digital impression taking is not yet recommended as a routine clinical technique.
5. For missing dentition and implant-supported superstructure restorations, digital impression taking is not recommended as a routine clinical technique.
인기 탭: zimmer tsv scanbody, 중국, 공급 업체, 제조업체, 공장, 도매, 구매, 가격, 판매, 중국 제
문의 보내기
당신은 또한 좋아할지도 모릅니다










